All corrections are for the physical (printed) version of the pattern.
The Burcham V1
-
Cutting Chart - Exterior Zipper Pocket = 8 x 7
-
Cutting Chart - Interior Zipper Pocket = 8 x 5
The Burcham V2
-
Back Cover - 3 - #5 Zipper Pulls
-
Page 5 - Figure 1 is blurred
-
Cutting Chart - Exterior Zipper Pocket = 8 x 7
-
Cutting Chart - Interior Zipper Pocket = 8 x 5
The Busta V1
-
Cutting Chart - Handle 1* = 24 x 3
-
Cutting Chart - Handle 2* = 21 x 3
The Cianna V1
-
Pattern Pieces - Slip Pocket Large = Cut 1 Lining/Cut 1 Interfacing
The Compton V1
-
The Exterior pattern piece is 3/8” too long - trim 3/8” off the bottom of the pattern piece
-
The snap placement marks are too high - lower them by ½” each on the Upper Lining 1 pattern piece
The Fairhaven V1
-
Page 15 (Figure 66) - "Center the small Slip Pocket 5" down............."
The Fairhaven V2
-
Page 14 (Figure 66) - "Center the small Slip Pocket 5" down............."
The Julie V1
-
Page 23, Step 6 – Lining Construction should say "Step 4 - Lining Construction"
-
Page 31, Step 7 – Finishing should say "Step 5 – Assembly"
The Julie V2
-
The seam allowance is 1/2" throughout unless otherwise stated. Please use 1/4" or 1/8" for topstitching.
-
Page 35 – Should say "Measure 3/4" from the short edge of the Handle and mark a dot with a fabric pen (Figure 194). From the 3/4" mark, measure 1 3/4" and mark another dot...."
The Lil’ Leah V1
-
A magnetic snap is missing from the hardware list.